All Z Plus 2

PRO-Craft Dental Lab All Ceramic Products

ALL Z Plus High Translucent Solid Zirconia Crowns

With All Z Plus you get the translucency you need since it is built right into the zirconia disk used to mill your unit. No surface stain translucency like you get from the Big Box labs. PRO-Craft Dental Laboratory uses the most advanced 4Y zirconia that offers 5% higher translucency.

All-Z Plus provides you with the look of pressed ceramic and the strength of solid zirconia.  Give your patients the latest in dental esthetics with All-Z Plus Zirconia Crowns.

With All-Z Plus you get the translucency you need for anteriors, there is no need for a shoulder or chamfer prep, minimum reduction (only .06mm), and strength that no other dental esthetic material can match.

All-Z Plus High Translucent Solid Zirconia Crown Specifications

Advantages & Benefits

  • All Z Plus translucency is fabricated using a layered disk of zirconia so there is no surface stain translucency.
  • All Z Plus Zirconia crown combines the look of pressed ceramic with the strength of solid zirconia
  • Minimum reduction (only 0.06mm)
  • Chamfer or shoulder margins preferred. Feather-edge OK
  • No white spots if adjustment is needed - shade built into material
  • Better light transmission

Monolithic ceramic material 

  • Resistant to chipping
  • No porcelain overlay

Hand pumiced and polished

  •  Less wear on opposing teeth
  • Prevents plaque accumulation
  • Creates natural dental esthetics and tooth surface

Dental Esthetics 

  • Comparable to pressed ceramic
  • Built in translucency no surface stain

Natural Fluorescence

       Same as natural teeth

PRO-Craft custom natural anatomical library

  • Created and only available at PRO-Craft Dental Laboratory
  •  Morphology of natural teeth not dental crowns


  • Anterior and posterior crowns, inlays and onlays
  • Anterior and premolar bridges with one pontic
  • More conservative preparation than IPS e.max® 0.8 mm required, 1 mm is ideal*


  • Resin-reinforced glass ionomer cement
  • For short or over-tapered preparations, use a resin cement such as RelyX™ Unicem (3M ESPE) or Panavia™
  • ALL Z Plus Zirconia crowns can be bonded using adhesive systems with dual cure resins (RelyX Unicem, 3M ESPE; Panavia F2.0, Kuraray.
  • We recommend Z-PRIME from BISCO to prepare the inside of the crown for adhesive dentistry), or cemented using low expansion cements, like resin-modified glass ionomers, (RelyX Luting Cement, 3M ESPE; GCFuji Plus, GC America)

Flexural Strength

900 MPa

Material Composition

Monolithic zirconia

Lab Processing Time

5 working days

Available Shades

We have many shade guides to follow and routinely utilize the VITA® Shade Guide, Bioform® IPN Shade Guide, and Illumine White Shades (Dentsply).

ISO 6872:2015 Classification

Specifies the requirements and the corresponding test methods for dental ceramic materials for fixed all-ceramic and metal-ceramic restorations and prostheses.


LIMITED WARRANTY/LIMITATION OF LIABILITY. PRO-Craft Dental Laboratory (“the lab”) warrants that all dental devices (a “device”) are made according to your specification and approval in the belief that the device will be useful and MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Subject to the return of a device that is placed and then fails, the lab will repair or replace the device without charge for the cost of materials and workmanship or refund the original price paid, at the lab’s option, for the life of the patient originally receiving the restoration from the date of placement. This limited lifetime performance warranty shall apply to direct end-user customers (treating clinicians) only.

Preparation Guide

  • PRO-Craft Dental Lab Prep Guide
  • 1.0 mm ideal reduction (0.8 mm minimum)
  • Chamfer or shoulder margins preferred. Feather-edge OK
  • Axial walls must be convergent (avoid undercuts)
  • Preparation should be cut in three planes
  • To achieve optimal impression quality, gingival retraction is necessary for preparations with subgingival or equigingival margins

ADA Codes

  • D2740 Crown - Porcelain/Ceramic Substrate
  • D6245 Pontic Porcelain/Ceramic
  • D6740 Abutment Crown Porcelain/Ceramic

PRO-Craft Dental Lab Video Resources

What Can I Do To Make Sure My Crowns Fit?

How well are your crowns fitting your patients? Finding a dental lab partner that can create dental restorations that fit without adjustments or remakes is crucial to a successful dental practice.

What are the different materials and strengths of Zirconia?

Zirconia is available in different strengths and qualities for dental restorations. Find out which types of zirconia are better for anterior and posterior teeth and more.

The Fundamentals of Dental Lab Excellence

Here's how you can get consistent results on every dental lab case you send. Is your dental lab following these processes?

Dental Lab Comparison Chart



Roe Dental Lab - Super Translucent Zirconia

Flexural Strength

900 MPa

900 MPa

850 MPa

Hand Pumiced & Polished



No to zirconia surface, yes to glaze surface.

Translucent Layer Built into material block




Custom Library For Natural Tooth Morphology




Surface Stain to Create Incisal Translucency












Case Processing Time

5 working days

5 working days

7 working days

Technical Support

Same person every time

Different people every time

Different people every time

All-Z is a full contour 100% zirconia crown and bridge material designed and milled utilizing CAD/CAM technology with no porcelain overlay. Tough as nails and chip proof!

All-Z Plus Implant Prosthetic (All-On-4) combines the advantages of All-Z Plus solid zirconia with cutting edge implant technology.

Give your patients one of the most durable and esthetic all-ceramic restorations available with PRO-Z Full Layered Zirconia from PRO-Craft Dental Laboratory. PRO-Z Full Layered Zirconia is the ideal...

The PRO-Craft Dental Laboratory Guarantee

7807188_made in the usa_usa_made in america_america_made_icon

Made In the USA

All PRO-Craft products are made in the domestic United States.

1200333_customer support_call_customer service_icon

On-Call Tech Support

On-call tech support during business hours. Receive direct access to a team lead immediately.


Free Rush Cases

We provide free rush cases anywhere in the contiguous United States


Quality Assurance

10-Steps quality assurance check on every case, completed by master technicans


As an industry leader in CAD/CAM technology, we have taken the fabrication of digital restorations to a new & exciting level of service.

25791 Jefferson Ave, Murrieta, CA 92562 
877-4-THE-LAB (484-3522)

Search The Site